Technical Characteristics
Model MPS
Max weight capacity: 80 Kg
Max vertical lifting speed: 0,5 meters / second
Vertical lift: 1800 mm
Control system: solely pneumatic
Supply: filtrated compressed-air (40 µm), not lubricated
Working pressure: 0.7 ÷ 0.8 Mpa
Working temperature: from +0° to +45° C
Noise level: <70 dB
Consumption: from 10 Nl ÷ 20 Nl per working cycle
Rotation: ∞360° on tooling axis
Model MPS Plus 6
Max weight capacity: 170 Kg – (220 kg Plus 8)
Max vertical lifting speed: 0,5 meters / second
Vertical lift: 2000 mm
Control system: solely pneumatic
Supply: filtrated compressed-air (40 µm), not lubricated
Working pressure: 0.7 ÷ 0.8 Mpa
Working temperature: from +0° to +45° C
Noise level: <70 dB
Consumption: from 20 Nl ÷ 80 Nl per working cycle
Rotation: ∞360° on tooling axis
Operation
A pneumatic cylinder fed with compressed-air and combined with a transmission cables system provides balance to the load weight applied.
The cylinder force is controlled through two pneumatic circuits. The first circuit always keeps the weight system balanced; the second always keeps the weight load balanced. The operator can change the load level by applying a minimum force on the gripping tool or directly on the load.
Stainless steel version
Dalmec can manufacture the Manipulator Minipartner in stainless steel.
The Manipulator and the gripping equipments are built for cleanliness in the pharmaceutical, food and chemical industries, as well as in other sterile environments.
The structure is realized using AISI 304 stainless steel with few parts in AISI 420/421. Welding is mostly performed using MAG and MIG methods in an inert gas atmosphere; major welds, from an aesthetic and functional standpoint, are ground and smoothed. Visible surfaces are polished and brush-finished.
Explosion-proof version in conformity with ATEX Directive
Dalmec can supply an explosion-proof version in conformity with ATEX Directive, suitable for the installation of the Manipulator in explosion-risk environments classified as zone 1 or 2.
The certification is made in our plant by the qualified Engineer of a Notified Body according to the ann. IX 94/9/EC-ATEX Directive, which ensures the total conformity of the Manipulator with the Directive.
Allows for fast presetting of the load balancing effect in case of weight change.
Enables quick, precise and linear lifting and handling of the load without any adjustments through manipulating a lever control.
Manipulating the gripping through proper controls allows for automatic load balancing without any adjustment.
The Manipulator is supplied with overhead trolleys to run in a track system.
- Mono rail bridge crane – composed of one special cold rolled section complete with trolleys and compressed-air supply spirals to slide manually in the tracking.
- Dual-rail tracking – composed of two tracks in a special cold rolled metallic section, complete with suspension brackets approximately every 2500 mm and end buffers.
Suspension on the support structure
The track suspension on the support structure is done with rods and suspension brackets.